Products

V-Groove Kits

Jon Strouse — Tue, 13 Jan 2026 02:35:10 +0000

Applicable

V-Groove Kit	Q102-M12+	Quantum-Ultra Ribbon
SVG01-1220	Compatible	Compatible
SVG01-1225	Compatible	Compatible
SVG01-1620	Non-Compatible	Compatible
SVG01-0100	Compatible	Compatible

Ordering Information

Part Number	Description
SVG01-1220	Replacement V-Groove Block kit for 12 fibers 200μm splicing, includes V-Groove Block, Preconditioned ER-10-200 Electrodes with holders, Pair of FHM-12N Fiber Holders, Case
SVG01-1225	Replacement V-Groove Block kit for 12 fibers 250μm splicing, includes V-Groove Block, Preconditioned ER-10 Electrodes with holders, Pair of FHM-12V Fiber Holders, Case
SVG01-1620	Replacement V-Groove Block kit for 16 fibers 200μm splicing, includes V-Groove Block, Preconditioned ER-10 Electrodes with holders, Pair of FHM-16N Fiber Holders, Case
SVG01-0100	Replacement V-Groove Block kit for single fiber splicing, includes V-Groove Block, Preconditioned ER-10 Electrodes with holders, Pair of FHM-09 Fiber Holders, Case

(APAC Region Only) Freeform Ribbon™ Conventional OSP Nylon Sheath All-Dielectric Slotted Core Cables

Jon Strouse — Sun, 11 Aug 2024 01:32:11 +0000

Specifications

General
Region Availability	APAC Region Only
Application	Outside Plant
Jacket Color	Aqua
Cable Structure	Slotted Core
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Bend Radius
During Installation	20 x Cable OD

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Compression Resistance	124 lb/in (220 N/cm)

Temperature Range
Operation	+14°F to +158°F (-10°C to +70°C)

Standards
Standards	Referencing EIA/TIA-455

Ordering Information

SEI Part Number	Fiber Size	Fiber Count	Nominal Cable OD		Nominal Weight		Fibers Per Ribbon	Fiber Per Slot	Stranding	Strength Member
SEI Part Number	Fiber Size	Fiber Count	IN	MM	LB/KFT	KG/KM	Fibers Per Ribbon	Fiber Per Slot	Stranding	Strength Member
NM432SM(PA)- SZ12(EZB)-WB-E/NY{LB}	250 μm	432f	0.83	21.0	201.6	300.0	12f	72	SZ	FRP
NM1728SM(PA)- TS12-WB-E/NY{LB}	250 μm	1,728f	1.14	29.0	470.4	700.0	12f	288	HL	FRP
NM288SM(PA200)- SZ12(EZB)-WB-E/NY{LB}	200 μm	288f	0.63	16.0	147.8	220.0	12f	48	SZ	FRP
NM432SM(PA200)- SZ12(EZB)-WB-E/NY{LB}	200 μm	432f	0.69	17.5	181.4	270.0	12f	72	SZ	FRP
NM864SM(PA200)- SZ12(EZB)-WB-E/NY{LB}	200 μm	864f	0.79	20.0	255.3	380.0	12f	144	SZ	FRP
NM1728SM(PA200)- SZ12(EZB)-WB-E/NY{LB}	200 μm	1,728f	1.06	27.0	315.8	470.0	12f	288	SZ	FRP

Accessories

Part Number	Description
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
ACS-01	Armored Cable Slit & Ring Tool, 0.315 – 1.125 in (8 – 28.6 mm) for End/Mid-Span Access
ACS-01-BLADE	Replacement Blade for ACS-01
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers

Resources

Data Center Solutions | Sumitomo Electric Lightwave Corp. (SEL)

Global Data Center Support – Asia Pacific & Middle East

(APAC Region Only) Freeform Ribbon™ Conventional OSP Slotted Core Cables

Jon Strouse — Sun, 11 Aug 2024 19:21:15 +0000

Specifications

General
Region Availability	APAC Region Only
Application	Outside Plant
Jacket Color	Black
Cable Structure	Slotted Core
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Bend Radius
During Installation	20 x Cable OD

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Compression Resistance	124 lb/in (220 N/cm)

Temperature Range
Operation	-40°F to +158°F (-40°C to +70°C)

Standards
Standards	Referencing EIA/TIA-455

Ordering Information

Part Number		Fiber Size	Fiber Count	Nominal Cable OD		Nominal Weight		Fibers Per Ribbon	Fiber Per Slot	Stranding	Strength Member
SEL	SEI	Fiber Size	Fiber Count	IN	MM	LB/KFT	KG/KM	Fibers Per Ribbon	Fiber Per Slot	Stranding	Strength Member
N/A	288SM(PA200)- SZ12(EZB)-WB-E	200 μm	288f	0.56	14.2	117.6	175.0	12f	48	SZ	Metallic
DRSC-OSP6-SA00288- 200-ADEROLD	NM288SM(PA200)- SZ12(EZB)-WB-E	200 μm	288f	0.60	15.0	127.7	190.0	12f	48	SZ	FRP
DRSC-OSP6-SA00432- 200-ADEROLD	NM432SM(PA200)- SZ12(EZB)-WB-E	200 μm	432f	0.65	16.5	134.4	200.0	12f	72	SZ	FRP
DRSC-OSP6-SA00864- 200-ADE	NM864SM(PA200)- SZ12(EZB)-WB-E	200 μm	864f	0.75	19.0	201.6	300.0	12f	144	SZ	FRP
DRSC-OSP6-SA01728- 200-ADE	NM1728SM(PA200)- SZ12(EZB)-WB-E	200 μm	1,728f	0.99	25.0	268.8	400.0	12f	288	SZ	FRP

Accessories

Part Number	Description
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
ACS-01	Armored Cable Slit & Ring Tool, 0.315 – 1.125 in (8 – 28.6 mm) for End/Mid-Span Access
ACS-01-BLADE	Replacement Blade for ACS-01
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers

Resources

Data Center Solutions | Sumitomo Electric Lightwave Corp. (SEL)

Global Data Center Support – Asia Pacific & Middle East

(APAC Region Only) Freeform Ribbon™ Indoor/Outdoor LSZH Slotted Core Cables

Jon Strouse — Sun, 11 Aug 2024 19:40:16 +0000

Specifications

General
Region Availability	APAC Region Only
Application	Outside Plant
Jacket Color	Black
Cable Structure	Slotted Core
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Bend Radius
During Installation	20 x Cable OD

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Compression Resistance	124 lb/in (220 N/cm)

Ordering Information

SEI Part Number	Fiber Size	Fiber Count	Nominal Cable OD		Nominal Weight		Fibers Per Ribbon	Fiber Per Slot	Stranding	Strength Member	Standards
SEI Part Number	Fiber Size	Fiber Count	IN	MM	LB/KFT	KG/KM	Fibers Per Ribbon	Fiber Per Slot	Stranding	Strength Member	Standards
NM864SM(PA)-TS12(EZB)- WB-E-LSZH(EN)	250 μm	864f	0.89	22.5	295.7	440.0	12f	144	HL	FRP	IEC 60332-3 Part 3 Cat.C	EN50399
NM1728SM(PA)-TS12(EZB)- WB-E-LSZH(EN)	250 μm	1,728f	1.11	28.0	403.2	600.0	12f	288	HL	FRP	IEC 60332-3 Part 3 Cat.C	EN50399
NM288SM(PA200)-SZ12(EZB)- WB-E-LSZH	200 μm	288f	0.65	16.5	168.0	250.0	12f	48	SZ	FRP	IEC 60332-3 Part 3 Cat.C	IEC 61034-2
288SM(PA200)-SZ12(EZB)- WB-E-LSZH	200 μm	288f	0.61	15.5	164.7	245.0	12f	48	SZ	Metallic	IEC 60332-3 Part 3 Cat.C	IEC 61034-2
432SM(PA200)-SZ12(EZB)- WB-E-FR	200 μm	432f	0.69	17.5	221.7	330.0	12f	72	SZ	Metallic	JIS C 3521	N/A
NM1728SM(PA200)-TS12(EZB)- WB-E-LSZH(EN)	200 μm	1,728f	0.97	24.5	309.1	460.0	12f	288	HL	FRP	IEC 60332-3 Part 3 Cat.C	EN50399

Accessories

Part Number	Description
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
ACS-01	Armored Cable Slit & Ring Tool, 0.315 – 1.125 in (8 – 28.6 mm) for End/Mid-Span Access
ACS-01-BLADE	Replacement Blade for ACS-01
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers

Resources

Data Center Solutions | Sumitomo Electric Lightwave Corp. (SEL)

Global Data Center Support – Asia Pacific & Middle East

Freeform Ribbon™ Indoor/Outdoor X-Slotted Core Cable

Jon Strouse — Tue, 05 Nov 2024 11:23:29 +0000

Specifications

General
Application	Indoor/Outdoor
Jacket Color	Black
Jacket Material	Flame Retardant Polyethylene (FRPE)
Cable Structure	Slotted Core
Ribbon Type	Freeform Ribbon™
Metallic Elements	Bonding / Grounding Required

Fiber
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Mechanical Characteristics
Maximum Tensile Load (During Installation)	600 lb (2,670 N)
Maximum Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

Bend Radius
During Installation (Dynamic)	20 x Cable OD
After Installation (Static)	12.5 x Cable OD

Temperature Range
Operation	-40°F to +158°F (-40°C to +70°C)

Standards
Standards	OFNR, UL 1666

Ordering Information

Part Number	Fiber Count	Nominal Cable OD		Nominal Weight		No. of Slots	Fiber Per Bundle	Fibers Per Slot	Strength Member
Part Number	Fiber Count	IN	LB/KFT	LBS/KFT	KG/KM	No. of Slots	Fiber Per Bundle	Fibers Per Slot	Strength Member
200 μm
SE-8GGT6912-B-M	6,912f	1.30	33.0	655.0	975.0	4	288f	1,728f	FRP

Accessories

Part Number	Description
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Freeform Ribbon™ Outdoor/Indoor OFNR LSZH Monotube Cables

Jon Strouse — Thu, 08 Jan 2026 22:51:29 +0000

Specifications

General
Application	Outdoor/Indoor
Jacket Color	Black
Cable Structure	Monotube™
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type	PureBand™-R G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Bend Radius
During Installation (Dynamic)	20 x Cable O.D.
After Installation (Static)	15 x Cable O.D.

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

Temperature Range
Operation	-40°F to +158°F (-40°C to +70°C)
Storage & Shipping	-40°F to +158°F (-40°C to +70°C)
Installation	+14°F to +140°F (-10°C to +60°C)

Standards
Standards	OFNR, FT4, Low Smoke/ST-1

Ordering Information

Part Number	Fiber Count	Nominal Cable O.D.		Nominal Weight		Fibers Per Ribbon	Fibers Per Bundle	No. of Bundles
Part Number	Fiber Count	IN	MM	LBS/KFT	KG/KM	Fibers Per Ribbon	Fibers Per Bundle	No. of Bundles
200μm
SE-8BST0288-B	288f	0.54	13.8	107.8	160.4	12f	72f	4
SE-8BST0864-B	864f	0.69	17.6	166.0	247.1	12f	72f	12

Accessories

Part Number	Description
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers
FOS-01	Lynx-CustomFit™ Fiber Optic Shears

Freeform Ribbon™ All-Dielectric Monotube OSP Cable

Jon Strouse — Sun, 30 Jun 2024 23:10:42 +0000

Specifications

General
Application	Outside Plant
Jacket Color	Black
Cable Structure	Monotube™
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type (96f to 864f Only)	PureBand™-R G.657.A1 Bend Insensitive Single-Mode Fiber (Mode Field Diameter at 1310 nm: Typ. 9.2 μm)
Fiber Type (1728f Only)	PureAccess® G.657.A1Bend Insensitive Single-Mode Fiber (Mode Field Diameter at 1310 nm: Typ. 8.6 μm)
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Bend Radius
During Installation (Dynamic)	20 x Cable OD
After Installation (Static)	15 x Cable OD

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

Temperature Range
Operation	-40°F to +158°F (-40°C to +70°C)
Storage & Shipping	-40°F to +158°F (-40°C to +70°C)
Installation	-22°F to +140°F (-30°C to +60°C)

Standards
Standards	Referencing Telcordia GR-20

Ordering Information

Part Number	Fiber Count	Nominal Cable OD		Nominal Weight		No. of Unit	Fiber No. of Unit
Part Number	Fiber Count	IN	MM	LB/KFT	KG/KM	No. of Unit	Fiber No. of Unit
250μm
SE-CMDP0096-G-M	96f	0.41	10.4	51.0	75.9	–	–
SE-CMDP0144-G-M	144f	0.43	10.9	55.8	83.0	2	72
SE-CMDP0288-G-M	288f	0.47	12.0	83.0	123.4	3	72
SE-CMDP0432-G-M	432f	0.53	13.5	100.8	150.0	6	72
SE-CMDP0864-G-M	864f	0.72	18.2	145.1	216.0	12	72
SE-8MDP1728-G-M	1,728f	0.98	24.9	246.0	366.0	24	72

Accessories

Part Number	Description
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
UCTS-001	Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
UCTS-001-BLADE	Replacement Blade for UCTS-001
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Freeform Ribbon™ Outdoor/Indoor LSZH Riser Monotube Cables (288f-1728f)

Jon Strouse — Mon, 17 Feb 2025 14:19:11 +0000

Declaration of Performance

Specifications

General
Application	Outdoor/Indoor
Jacket Color	Black
Cable Structure	Monotube™
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

Bend Radius
During Installation (Dynamic)	20 x Cable O.D.
After Installation (Static)	15 x Cable O.D.

Temperature Range
Operation	-40 to +158°F (-40 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+14 to +140°F (-10 to +60°C)

Standards
Standards	ICEA S-104-696, IEC 60794-6-10, UL 1666, UL 1685-LS

Ordering Information

Part Number	Fiber Size	Fiber Count	Nominal Cable OD (IN \| MM)	Nominal Weight (LB/KFT \| KG/KM)	Fibers per Ribbon	Fibers per Bundle
SE-8MMT0288-B-NP	200 μm	288f	0.50 (12.6)	89 (133)	12f	72f
SE-8MMT0432-B-NP	200 μm	432f	0.55 (13.9)	102 (152)	12f	72f
SE-8MMT0864-B-NP	200 μm	864f	0.69 (17.4)	137 (205)	12f	72f
SE-8MMT1728-B-NP	200 μm	1,728f	0.85 (21.6)	275 (410)	12f	72f

Accessories

Part Number	Description
CRC-001	Cable Ring Tool for End/Mid-Span Access; 0.25 – 1.625 in (4 – 28 mm)
CSC-002	Cable Slit Tool for End/Mid-Span Access
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
JR-7	Heated Jacket Remover with AC-Adapter & Battery for Single Fibers & up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250μm, 900μm, and up to 3mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Freeform Ribbon™ Outdoor/Indoor LSZH Riser Monotube Cables (3456f)

Katie Tart — Mon, 17 Feb 2025 14:01:34 +0000

Declaration of Performance

Specifications

General
Application	Outdoor/Indoor
Jacket Color	Black
Cable Structure	Monotube™
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type	PureAccess® G.657.A2 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

Bend Radius
During Installation (Dynamic)	20 x Cable O.D.
After Installation (Static)	15 x Cable O.D.

Temperature Range
Operation	-40 to +158°F (-40 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+14 to +140°F (-10 to +60°C)

Standards
Standards	ICEA S-104-696, IEC 60794-6-10, UL 1666, UL 1685-LS

Ordering Information

Part Number	Fiber Size	Fiber Count	Nominal Cable OD (IN \| MM)	Nominal Weight (LB/KFT \| KG/KM)	Fibers per Ribbon	Fibers per Bundle
SE-AMMT3456-B-NP	200 μm	3,456f	1.00 (25.4)	397 (592)	12f	144f

Accessories

Part Number	Description
CRC-001	Cable Ring Tool for End/Mid-Span Access; 0.25 – 1.625 in (4 – 28 mm)
CSC-002	Cable Slit Tool for End/Mid-Span Access
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
JR-7	Heated Jacket Remover with AC-Adapter & Battery for Single Fibers & up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250μm, 900μm, and up to 3mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Freeform Ribbon™ Outdoor/Indoor LSZH Riser Monotube Cables

Jon Strouse — Wed, 20 Nov 2024 13:12:42 +0000

Declaration of Performance

Specifications

General
Application	Outdoor/Indoor
Jacket Color	Black
Cable Structure	Monotube™
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km
Mode Field Diameter	1310 nm \| 8.6 μm ± 0.4 μm

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

Bend Radius
During Installation (Dynamic)	20 x Cable O.D.
After Installation (Static)	15 x Cable O.D.

Temperature Range
Operation	-40 to +158°F (-40 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+14 to +140°F (-10 to +60°C)

Standards
Standards	OFNR, UL 1666, 1685-LS, ICEA 696

Ordering Information

Part Number	Fiber Size	Fiber Count	Nominal Cable OD (IN \| MM)	Nominal Weight (LB/KFT \| KG/KM)	Fibers per Ribbon	Fibers per Bundle	CPR Rating
Part Number	SE-8MMP0288-B	Fiber Count	250 μm	288f	0.57 (14.5)	146 (218)	12f	72f	Cca, s1a, d2, a1

Accessories

Part Number	Description
CRC-001	Cable Ring Tool for End/Mid-Span Access; 0.25 – 1.625 in (4 – 28 mm)
CSC-002	Cable Slit Tool for End/Mid-Span Access
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
JR-7	Heated Jacket Remover with AC-Adapter & Battery for Single Fibers & up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250μm, 900μm, and up to 3mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Freeform Ribbon™ Flexible Indoor Plenum Cordage

Jon Strouse — Fri, 15 Nov 2024 19:24:17 +0000

Specifications

GENERAL
Application	Indoor
Jacket Color	Yellow
Cable Structure	Interconnect Cordage
Ribbon Type	Freeform Ribbon™

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

MECHANICAL CHARACTERISTICS
Maximum Tensile Load During Installation	50 lb (220 N)
Maximum Recommended Service Load	15 lb (66 N)
Maximum Compression Resistance	20 lb/in (35 N/cm)

BEND RADIUS
During Installation (Dynamic)	20 x Cable OD
After Installation (Static)	10 x Cable OD

TEMPERATURE RANGE
Operation	+32 to +158°F (0 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+32 to +140°F (0 to +60°C)

STANDARDS
Standards	OFNP, FT6

Ordering Information

PART NUMBER	FIBER COUNT	NOMINAL CABLE OD (in \| mm)	NOMINAL WEIGHT (lb/kft \| kg/km)	FIBERS PER RIBBON	NO. OF BUNDLES
250μm
SE-8IUP0012-B-12	12f	0.10 (3.0)	6.0 (8.9)	12f	N/A
SE-8IUP0024-B-12	24f	0.12 (3.0)	6.0 (8.9)	12f	N/A
SE-8IUP0048-B-12	48f	0.15 (3.8)	8.0 (11.9)	12f	N/A

Accessories

PART NUMBER	DESCRIPTION
BTR-2	Buffer Tube Slit & Ring Tool, 0.126 – 0.220 in (3.2 – 5.6 mm) for End/Mid-Span Access
BTS-TP1	Buffer Tube Slit Tool, 0.071 – 0.126 in (1.8 – 3.2 mm) for End/Mid-Span Access
FRSJ-01	Freeform Ribbon® Separation Tool Kit
JR-7	Heated Jacket Remover with AC-Adapter & Battery for Single Fibers & up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250μm, 900μm, and up to 3mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears
LYNX2-CORDTOOL-1.6-2.0-3.0	Buffer Tube Slit & Ring Tool, 0.06 – 0.09 in (1.6 – 2.4 mm) for Lynx-CustomFit™ Cord Prep and End Access
LYNX2-CORDTOOL-2.0-3.0	Buffer Tube Slit & Ring Tool, 0.08 – 0.12 in (2.0 – 3.0 mm) for Lynx-CustomFit™ Cord Prep and End Access
LYNX2-CORDTOOL-4.8	Buffer Tube Slit & Ring Tool, 0.06 – 0.12 in (1.6 – 3.0 mm) for Lynx-CustomFit™ Cord Prep and End/Mid-Span Access
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
MSAT-01	Buffer Tube Slit Tool, 0.12 – 0.26 in (2.9 – 6.8 mm) for End/Mid-Span Access, and Lynx-CustomFit™ Connectors

Freeform Ribbon™ Indoor LSZH Riser Central Tube Cables

Jon Strouse — Wed, 15 Apr 2020 14:20:39 +0000

Declaration of Performance

Specifications

GENERAL
Application	Indoor
Jacket Color	Yellow
Cable Structure	Central Tube
Ribbon Type	Freeform Ribbon™

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

BEND RADIUS
During Installation	20 x Cable OD
After Installation	10 x Cable OD

MECHANICAL CHARACTERISTICS
Maximum Tensile Load During Installation	300 lb (1,340 N)
Maximum Recommended Service Load	100 lb (450 N)
Compression Resistance	125 lb/in (220 N/cm)

TEMPERATURE RANGE
Operation	+32 to +158°F (0 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+32 to +140°F (0 to +60°C)

STANDARDS
Standards	OFNR, FT4, Low Smoke/ST-1

Ordering Information

PART NUMBER	FIBER SIZE	FIBER COUNT	NOMINAL CABLE OD (in \| mm)	NOMINAL WEIGHT (lb/kft \| kg/km)	FIBERS PER RIBBON	NO. OF BUNDLES	CPR RATING
SE-8RZP0072-B-12	250 μm	72f	0.46 in (11.8 mm)	98.5 lb/kft (146.5 kg/km)	12f	N/A	N/A
SE-8RNP0096-B-12	250 μm	96f	0.46 in (11.8 mm)	100.1 lb/kft (148.9 kg/km)	12f	N/A	Cca, s1a, d0, a1
SE-8RZP0144-B-12	250 μm	144f	0.57 in (14.4 mm)	129.1 lb/kft (192.1 kg/km)	12f	N/A	N/A
SE-8RNP0192-B-12	250 μm	192f	0.57 in (14.4 mm)	132.3 lb/kft (196.9 kg/km)	12f	N/A	Cca, s1a, d0, a1
SE-8RZT864-B	200 μm	864f	0.86 in (21.8 mm)	268.4 lb/kft (399.4 kg/km)	12f	12	N/A

Accessories

PART NUMBER	DESCRIPTION
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
UCTS-001	Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
BTR-3	Buffer Tube Slit & Ring Tool, 0.250 – 0.563 in (6.4 – 14.3 mm) for End/Mid-Span Access
UCTS-001-BLADE	Replacement Blade for UCTS-001
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and Up to 3 mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Resources

Fiber Optic Ribbon Termination Resources
SRP SP-F02-035: Pliable Ribbon Indoor Riser Cable Preparation
SRP SP-F02-045: Freeform Ribbon™ Matrix Removal Procedure
Freeform Ribbon™ Marking Codes
UCTS-001 Instructions

Fiber Optic Ribbon Termination Resources
Sumitomo Electric PureAccess® Single-Mode Fiber Specification