Ordering Information

MPO Splice-On Connectors

Instructions: Create a part number by using this character set & codes.

LYNX2-MPO12 [ 1 ] – [ 2 2 ] [ 3 3 ] – [ 4 4 4 4 4 ]

[ 1 ] – Connector Gender	[ 2 ] – Fiber	[ 3 ] – Fiber Type	[ 4 ] – Fiber Construction
M – Male F – Female	SM – Single Mode MM – Multimode	LL – SM Low Loss SL – SM Std Loss 01 – OM1 Fiber 03 – OM3/4 Fiber 02 – OM5 Fiber	RBN – 12f Ribbon RBC – 12f Ribbon w/ Jacket RC3.0 – 3.0 mm Cord

Accessories

Item Number	Description
LYNX-CORDTOOL-2.0-3.0	Lynx SOC, Cord Prep Tool, 2/3mm
FA-03	Fiber Arrangement and Ribbonization tool with a single fiber clamp for making shorter ribbons for use with Lynx-CustomFit™ MPOs.
FTA-02	Fiber Arrangement and and Ribbonization tool with clamps on both ends for making shorter ribbons with a single end, for Lynx-CustomFit™ MPO, or longer ribbons by using both ends for a ribbon-to-ribbon fusion splice.
FAC-24	Consumables for Fiber Arrangement Tool (Makes Approx. 30 Ribbons, for use with FA-03 or FTA-02)
FHM-12-MPO-MTL	Lynx-MPO Ferrule Holder, Metal/Universal
LYNX2-ATK2-MPO	Assembly Platform with Integrated Fiber Arrangement Tool
LYNX2-MPO-HRT-1	MPO Outer Housing Disassembly Tool
LYNX2-TKU-MPO-RCATK	Lynx-CustomFit™ MPO Tool Kit with Assembly Platform (LYNX2-ATK2-MPO), Cord Tool (LYNX-CORDTOOL-2.0-3.0), Lynx-CustomFit™ Metal Ferrule holder (FHM-12-MPO-MTL), Fiber Optic Shears (FOS-01), Ribbonizing Glue and Pads (FAC-24), and Backpack (LYNX-BAG)
LYNX2-TKU-MPO-RC	Lynx-CustomFit™ MPO Tool Kit with Fiber Arrangement and Ribbonization Tool (FA-03), Cord Tool (LYNX-CORDTOOL-2.0-3.0), Lynx-CustomFit™ Metal Ferrule holder (FHM-12-MPO-MTL), Fiber Optic Shears (FOS-01), Ribbonizing Glue and Pads (FAC-24), and Backpack (LYNX-BAG)
TYPE-Q102-M12p-KIT-MPO	Quantum Mass Fusion Splicer, Cleaver, Thermal Jacket Remover, Spare Electrodes, 12ct Ribbon Fiber Holders, 250um Single Fiber Holders, V-Groove Brush, Power Cord, Manual, Hard Case, MPO Assembly Tool Kit, Consumable Kit, 2mm/3mm Cord Tool, Fiber Optic Shears, MPO Metal Holder

Ordering Information

Splice-On Connectors

Instructions: Create a part number by using this character set & codes:

LYNX3 – [ 1 1 ] [ 2 2 2 ] – [ 3 3 3 ] – [ 4 4 4 4 4 4 4 4 ]

[ 1 ] – Connector Type	[ 2 ] – Polish Type	[ 3 ] – Fiber Type	[ 4 ] – Media Diameter
LC – LC Connector SC – SC Connector FC – FC Connector ST – ST Connector	APC – Angled Polished Connector UPC – Ultra Polished Connector PC – Physical Contact	OM1 – Multimode 62.5 μm OM2 – Multimode 50 μm OM3 – Multimode 50 μm, Laser Optimized OM3, OM4, OM5 Compatible SM – Single-mode	250900 – For 250 μm, 900 μm Tight Buffer and 900 μm Loose Buffer (ABF Breakout Kit Compatible) 250900SB – Short Boot for SC and LC 250 μm/900 μm Tight Buffer 250FT8 – For 250 μm with 8” Furcation Tube 2.0 – For 2.0 mm Cord 2.0LT – For 2.0 mm Cord with 900 μm Tube 3.0 – For 3.0 mm Cord 3.0DCL – Only for LC Duplex Application with 3.00 mm Cord 4.8 – For 4.8 mm Cord (SM, SC, APC Only)

Accessories

Part Number	Description
LYNX-TOOL-KIT	Tool Kit Includes LYNX-COORDTOOL-2.0-3.0, LYNX-C, LYNX-S, FOS-01, JR-M03, and Permanent Marker
LYNX-CORDTOOL-4.8	Cord Prep Tool for 4.8mm
LYNX-CORDTOOL-2.0-3.0	Cord Prep Tool for 2.0/3.0mm
LYNX-C-PLS	Lynx-CustomFit™ Plastic Ferrule Side Holder for LC, SC, FC, and ST
LYNX-C-PLS-MAG	Lynx-CustomFit™ Plastic Ferrule Side Holder for LC, SC, FC, and ST with Magnets
LYNX-C-PLS-MAG-BLK	Lynx-CustomFit™ Plastic Ferrule Side Holder for LC, SC, FC, and ST with Magnets (Bulk Pack of 10)
LYNX-S-LB	Lynx-CustomFit™ Left Side Holder for 900μm Loose Tube or 2.0mm Cord with 900μm Tubing
LYNX-C	Lynx-CustomFit™ Metal Ferrule Side Holder
LYNX-S	Lynx-CustomFit™ Metal Splice Sleeve Side Holder
LYNX-S-LB	Fiber Holder, Loose Buffer 250/900μm, 900LT
FOS-01	Fiber Optic Shears
JR-M03	Jacket Remover
LYNX-DUPLEXCLIP-SC	Duplex Clip for SC (10 per Unit)
LYNX-DUPLEXCLIP-LC	Duplex Clip for LC (10 per Unit)
LYNX-ST-AT-01	ST Assembly Tool (Required for all ST Connectors)

Ordering Information

Part Number	Description
QSC-APCSM-250900	QUICK-SC, APC SMF 250/900 µm
QSC-UPCSM-250900	Quick-SC, UPC SMF 250/900 μm
QSC-PCMM5-250900	Quick-SC, PC MM 50μm, 250/900 μm
QSC-PCMM5OM3-250900	Quick-SC, PC MM 50μm OM3/4, 250/900 μm
QSC-PCMM6-250900	Quick-SC, PC MM 62.5μm, 250/900 μm
QLC-UPCSM-250900	Quick-LC, UPC SMF 250/900 μm
QLC-PCMM5-250900	Quick-LC, PC MM 50μm, 250/900 μm
QLC-PCMM5OM3-250900	Quick-LC, PC MM 50μm OM3/4, 250/900 μm
QLC-PCMM6-250900	Quick-LC, PC MM 62.5μm, 250/900 μm
QSC-JIG-KIT	Quick SC, Assembly JIG Base w/ 900 μm Fiber Holder
QLC-JIG-KIT	Quick LC, Assembly JIG Base w/ 900 μm Fiber Holder
QMC-TK-FC6Sp	Basic Tool Kit for Quick Connectors. Includes FC-6S+ Benchtop Cleaver, Fiber Optic Cleaning Solution, Cleaning Wipes, and Mechanical Fiber Strippers.
QMC-TK-FC8R	Basic Tool Kit for Quick Connectors. Includes FC-8RF Cleaver, Fiber Optic Cleaning Solution, Cleaning Wipes, and Mechanical Fiber Strippers.