Freeform Ribbon™ Monotube Cable

Freeform Ribbon™ Outdoor/Indoor OFNR LSZH Monotube Cables

Jon Strouse — Thu, 08 Jan 2026 22:51:29 +0000

Specifications

General
Application	Outdoor/Indoor
Jacket Color	Black
Cable Structure	Monotube™
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type	PureBand™-R G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Bend Radius
During Installation (Dynamic)	20 x Cable O.D.
After Installation (Static)	15 x Cable O.D.

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

Temperature Range
Operation	-40°F to +158°F (-40°C to +70°C)
Storage & Shipping	-40°F to +158°F (-40°C to +70°C)
Installation	+14°F to +140°F (-10°C to +60°C)

Standards
Standards	OFNR, FT4, Low Smoke/ST-1

Ordering Information

Part Number	Fiber Count	Nominal Cable O.D.		Nominal Weight		Fibers Per Ribbon	Fibers Per Bundle	No. of Bundles
Part Number	Fiber Count	IN	MM	LBS/KFT	KG/KM	Fibers Per Ribbon	Fibers Per Bundle	No. of Bundles
200μm
SE-8BST0288-B	288f	0.54	13.8	107.8	160.4	12f	72f	4
SE-8BST0864-B	864f	0.69	17.6	166.0	247.1	12f	72f	12

Accessories

Part Number	Description
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers
FOS-01	Lynx-CustomFit™ Fiber Optic Shears

Freeform Ribbon™ All-Dielectric Monotube OSP Cable

Jon Strouse — Sun, 30 Jun 2024 23:10:42 +0000

Specifications

General
Application	Outside Plant
Jacket Color	Black
Cable Structure	Monotube™
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type (96f to 864f Only)	PureBand™-R G.657.A1 Bend Insensitive Single-Mode Fiber (Mode Field Diameter at 1310 nm: Typ. 9.2 μm)
Fiber Type (1728f Only)	PureAccess® G.657.A1Bend Insensitive Single-Mode Fiber (Mode Field Diameter at 1310 nm: Typ. 8.6 μm)
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Bend Radius
During Installation (Dynamic)	20 x Cable OD
After Installation (Static)	15 x Cable OD

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

Temperature Range
Operation	-40°F to +158°F (-40°C to +70°C)
Storage & Shipping	-40°F to +158°F (-40°C to +70°C)
Installation	-22°F to +140°F (-30°C to +60°C)

Standards
Standards	Referencing Telcordia GR-20

Ordering Information

Part Number	Fiber Count	Nominal Cable OD		Nominal Weight		No. of Unit	Fiber No. of Unit
Part Number	Fiber Count	IN	MM	LB/KFT	KG/KM	No. of Unit	Fiber No. of Unit
250μm
SE-CMDP0096-G-M	96f	0.41	10.4	51.0	75.9	–	–
SE-CMDP0144-G-M	144f	0.43	10.9	55.8	83.0	2	72
SE-CMDP0288-G-M	288f	0.47	12.0	83.0	123.4	3	72
SE-CMDP0432-G-M	432f	0.53	13.5	100.8	150.0	6	72
SE-CMDP0864-G-M	864f	0.72	18.2	145.1	216.0	12	72
SE-8MDP1728-G-M	1,728f	0.98	24.9	246.0	366.0	24	72

Accessories

Part Number	Description
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
UCTS-001	Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
UCTS-001-BLADE	Replacement Blade for UCTS-001
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Freeform Ribbon™ Outdoor/Indoor LSZH Riser Monotube Cables (288f-1728f)

Jon Strouse — Mon, 17 Feb 2025 14:19:11 +0000

Declaration of Performance

Specifications

General
Application	Outdoor/Indoor
Jacket Color	Black
Cable Structure	Monotube™
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

Bend Radius
During Installation (Dynamic)	20 x Cable O.D.
After Installation (Static)	15 x Cable O.D.

Temperature Range
Operation	-40 to +158°F (-40 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+14 to +140°F (-10 to +60°C)

Standards
Standards	ICEA S-104-696, IEC 60794-6-10, UL 1666, UL 1685-LS

Ordering Information

Part Number	Fiber Size	Fiber Count	Nominal Cable OD (IN \| MM)	Nominal Weight (LB/KFT \| KG/KM)	Fibers per Ribbon	Fibers per Bundle
SE-8MMT0288-B-NP	200 μm	288f	0.50 (12.6)	89 (133)	12f	72f
SE-8MMT0432-B-NP	200 μm	432f	0.55 (13.9)	102 (152)	12f	72f
SE-8MMT0864-B-NP	200 μm	864f	0.69 (17.4)	137 (205)	12f	72f
SE-8MMT1728-B-NP	200 μm	1,728f	0.85 (21.6)	275 (410)	12f	72f

Accessories

Part Number	Description
CRC-001	Cable Ring Tool for End/Mid-Span Access; 0.25 – 1.625 in (4 – 28 mm)
CSC-002	Cable Slit Tool for End/Mid-Span Access
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
JR-7	Heated Jacket Remover with AC-Adapter & Battery for Single Fibers & up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250μm, 900μm, and up to 3mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Freeform Ribbon™ Outdoor/Indoor LSZH Riser Monotube Cables (3456f)

Katie Tart — Mon, 17 Feb 2025 14:01:34 +0000

Declaration of Performance

Specifications

General
Application	Outdoor/Indoor
Jacket Color	Black
Cable Structure	Monotube™
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type	PureAccess® G.657.A2 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

Bend Radius
During Installation (Dynamic)	20 x Cable O.D.
After Installation (Static)	15 x Cable O.D.

Temperature Range
Operation	-40 to +158°F (-40 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+14 to +140°F (-10 to +60°C)

Standards
Standards	ICEA S-104-696, IEC 60794-6-10, UL 1666, UL 1685-LS

Ordering Information

Part Number	Fiber Size	Fiber Count	Nominal Cable OD (IN \| MM)	Nominal Weight (LB/KFT \| KG/KM)	Fibers per Ribbon	Fibers per Bundle
SE-AMMT3456-B-NP	200 μm	3,456f	1.00 (25.4)	397 (592)	12f	144f

Accessories

Part Number	Description
CRC-001	Cable Ring Tool for End/Mid-Span Access; 0.25 – 1.625 in (4 – 28 mm)
CSC-002	Cable Slit Tool for End/Mid-Span Access
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
JR-7	Heated Jacket Remover with AC-Adapter & Battery for Single Fibers & up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250μm, 900μm, and up to 3mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Freeform Ribbon™ Outdoor/Indoor LSZH Riser Monotube Cables

Jon Strouse — Wed, 20 Nov 2024 13:12:42 +0000

Declaration of Performance

Specifications

General
Application	Outdoor/Indoor
Jacket Color	Black
Cable Structure	Monotube™
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km
Mode Field Diameter	1310 nm \| 8.6 μm ± 0.4 μm

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

Bend Radius
During Installation (Dynamic)	20 x Cable O.D.
After Installation (Static)	15 x Cable O.D.

Temperature Range
Operation	-40 to +158°F (-40 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+14 to +140°F (-10 to +60°C)

Standards
Standards	OFNR, UL 1666, 1685-LS, ICEA 696

Ordering Information

Part Number	Fiber Size	Fiber Count	Nominal Cable OD (IN \| MM)	Nominal Weight (LB/KFT \| KG/KM)	Fibers per Ribbon	Fibers per Bundle	CPR Rating
Part Number	SE-8MMP0288-B	Fiber Count	250 μm	288f	0.57 (14.5)	146 (218)	12f	72f	Cca, s1a, d2, a1

Accessories

Part Number	Description
CRC-001	Cable Ring Tool for End/Mid-Span Access; 0.25 – 1.625 in (4 – 28 mm)
CSC-002	Cable Slit Tool for End/Mid-Span Access
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
JR-7	Heated Jacket Remover with AC-Adapter & Battery for Single Fibers & up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250μm, 900μm, and up to 3mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Freeform Ribbon™ Armored Monotube OSP Cable

Jon Strouse — Tue, 09 Jan 2024 15:23:42 +0000

Specifications

General
Application	Outside Plant
Jacket Color	Black PE
Cable Structure	Monotube
Ribbon Type	Freeform Ribbon™
Metallic Elements	Bonding/Grounding Required

Fiber
Fiber Type	PureBand™-R G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Mode Field Diameter	1310 nm \| 9.2 +/- 0.4 μm
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

Bend Radius
During Installation	20 x Cable OD
After Installation	15 x Cable OD

Temperature Range
Operation	-40 to +158°F (-40 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	-22 to +140°F (-30 to +60°C)

Standards
Standards	Referencing Telcordia GR-20

Ordering Information

Part Number	Fiber Size	Fiber Count	Nominal Cable OD (in / mm)	Nominal Weight (lb/kft \| kg/km)	Fibers Per Ribbon	No. of Bundles
SE-CMBP0864-C	250 μm	864f	0.91 (23.0)	302.0 (450.0)	12f	12

Accessories

Part Number	Description
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
ACS-01	Armored Cable Slit & Ring Tool, 0.315 – 1.125 in (8 – 28.6 mm) for End/Mid-Span Access
ACS-01-BLADE	Replacement Blade for ACS-01
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears