Freeform Ribbon™ Central Tube Cables

Freeform Ribbon™ Indoor LSZH Riser Central Tube Cables

Jon Strouse — Wed, 15 Apr 2020 14:20:39 +0000

Declaration of Performance

Specifications

GENERAL
Application	Indoor
Jacket Color	Yellow
Cable Structure	Central Tube
Ribbon Type	Freeform Ribbon™

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

BEND RADIUS
During Installation	20 x Cable OD
After Installation	10 x Cable OD

MECHANICAL CHARACTERISTICS
Maximum Tensile Load During Installation	300 lb (1,340 N)
Maximum Recommended Service Load	100 lb (450 N)
Compression Resistance	125 lb/in (220 N/cm)

TEMPERATURE RANGE
Operation	+32 to +158°F (0 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+32 to +140°F (0 to +60°C)

STANDARDS
Standards	OFNR, FT4, Low Smoke/ST-1

Ordering Information

PART NUMBER	FIBER SIZE	FIBER COUNT	NOMINAL CABLE OD (in \| mm)	NOMINAL WEIGHT (lb/kft \| kg/km)	FIBERS PER RIBBON	NO. OF BUNDLES	CPR RATING
SE-8RZP0072-B-12	250 μm	72f	0.46 in (11.8 mm)	98.5 lb/kft (146.5 kg/km)	12f	N/A	N/A
SE-8RNP0096-B-12	250 μm	96f	0.46 in (11.8 mm)	100.1 lb/kft (148.9 kg/km)	12f	N/A	Cca, s1a, d0, a1
SE-8RZP0144-B-12	250 μm	144f	0.57 in (14.4 mm)	129.1 lb/kft (192.1 kg/km)	12f	N/A	N/A
SE-8RNP0192-B-12	250 μm	192f	0.57 in (14.4 mm)	132.3 lb/kft (196.9 kg/km)	12f	N/A	Cca, s1a, d0, a1
SE-8RZT864-B	200 μm	864f	0.86 in (21.8 mm)	268.4 lb/kft (399.4 kg/km)	12f	12	N/A

Accessories

PART NUMBER	DESCRIPTION
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
UCTS-001	Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
BTR-3	Buffer Tube Slit & Ring Tool, 0.250 – 0.563 in (6.4 – 14.3 mm) for End/Mid-Span Access
UCTS-001-BLADE	Replacement Blade for UCTS-001
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and Up to 3 mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Resources

Fiber Optic Ribbon Termination Resources
SRP SP-F02-035: Pliable Ribbon Indoor Riser Cable Preparation
SRP SP-F02-045: Freeform Ribbon™ Matrix Removal Procedure
Freeform Ribbon™ Marking Codes
UCTS-001 Instructions

Fiber Optic Ribbon Termination Resources
Sumitomo Electric PureAccess® Single-Mode Fiber Specification

Freeform Ribbon™ Indoor Plenum Central Tube Cables

Jon Strouse — Thu, 23 Aug 2018 18:46:13 +0000

Specifications

GENERAL
Application	Indoor
Jacket Color	Yellow
Cable Structure	Central Tube
Ribbon Type	Freeform Ribbon™

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

BEND RADIUS
During Installation	20 x Cable OD
After Installation	10 x Cable OD

MECHANICAL CHARACTERISTICS
Maximum Tensile Load (During Installation)	300 lb (1,340 N)
Maximum Recommended Service Load	100 lb (450 N)
Maximum Compression Resistance	125 lb/in (220 N/cm)

TEMPERATURE RANGE
Operation	+32 to +158°F (0 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+32 to +140°F (0 to +60°C)

STANDARDS
Standards	OFNP

Ordering Information

PART NUMBER	FIBER SIZE	FIBER COUNT	NOMINAL CABLE OD	NOMINAL WEIGHT	FIBERS PER RIBBON	NO. OF BUNDLES
SE-8RUP0012-B-12	250 μm	12f	0.41 in (10.3 mm)	85.5 lb/kft (127.6 kg/km)	12f	N/A
SE-8RUP0024-B-12	250 μm	24f	0.41 in (10.3 mm)	86.5 lb/kft (128.8 kg/km)	12f	N/A
SE-8RUP0048-B-12	250 μm	48f	0.41 in (10.3 mm)	88.0 lb/kft (131.0 kg/km)	12f	N/A
SE-8RUP0072-B	250 μm	72f	0.43 in (11.0 mm)	90.9 lb/kft (135.3 kg/km)	12f	1
SE-8RUP0096-B-12	250 μm	96f	0.43 in (11.0 mm)	92.4 lb/kft (137.5 kg/km)	12f	N/A
SE-8RUP0144-B-12	250 μm	144f	0.47 in (12.0 mm)	102.7 lb/kft (152.9 kg/km)	12f	N/A
SE-8RUP0192-B-12	250 μm	192f	0.46 in (11.7 mm)	98.4 lb/kft (146.4)	12f	N/A
SE-8RUP0288-B	250 μm	288f	0.57 in (14.4 mm)	134.2 lb/kft (199.7 kg/km)	12f	4
SE-8RUT0012-B-12	200 μm	12f	0.41 in (10.3 mm)	85.5 lb/kft (127.2 kg/km)	12f	N/A
SE-8RUT0024-B-12	200 μm	24f	0.41 in (10.3 mm)	86.0 lb/kft (128.0 kg/km)	12f	N/A
SE-8RUT0048-B-12	200 μm	48f	0.41 in (10.3 mm)	87.0 lb/kft (129.4 kg/km)	12f	N/A
SE-8RUT0072-B	200 μm	72f	0.43 in (11.0 mm)	89.3 lb/kft (132.9 kg/km)	12f	1
SE-8RUT0096-B-12	200 μm	96f	0.40 in (10.2 mm)	76.85 lb/kft (114.7 kg/km)	12f	N/A
SE-8RUT0144-B-12	200 μm	144f	0.47 in (12.0 mm)	99.5 lb/kft (148.1 kg/km)	12f	N/A
SE-8RUT0192-B-12	200 μm	192f	0.46 in (11.7 mm)	94.76 lb/kft (141.3 kg/km)	12f	N/A
SE-8RUT0288-B	200 μm	288f	0.57 in (14.4 mm)	129.1 lb/kft (190.0 kg/km)	12f	4

Accessories

PART NUMBER	DESCRIPTION
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
UCTS-001	Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
BTR-3	Buffer Tube Slit & Ring Tool, 0.250 – 0.563 in (6.4 – 14.3 mm) for End/Mid-Span Access
UCTS-001-BLADE	Replacement Blade for UCTS-001
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and Up to 3 mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Resources

Fiber Optic Ribbon Termination Resources
SRP (SP-F02-043) Pliable Ribbon Plenum Cable Preparation
SRP (SP-F02-045) Freeform Ribbon™ Matrix Removal Procedure
Freeform Ribbon™ Marking Codes
UCTS-001 Instructions

Optical Fiber Specifications
Sumitomo Electric PureAccess® Single-Mode Fiber Specification

Freeform Ribbon™ Indoor Riser Central Tube Cables

Jon Strouse — Thu, 21 Sep 2017 18:47:32 +0000

Specifications

GENERAL
Application	Indoor
Jacket Color	Yellow
Cable Structure	Central Tube
Ribbon Type	Freeform Ribbon™

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Attenuation – 1310 nm	0.40 dB/km
Attenuation – 1550 nm	0.30 dB/km

BEND RADIUS
During Installation	20 x Cable OD
After Installation	10 x Cable OD

MECHANICAL CHARACTERISTICS
Max. Tensile Load During Installation	600 lb (2,700 N)
Max. Recommended Service Load	200 lb (890 N)
Compression Resistance	125 lb/in (220 N/cm)

TEMPERATURE RANGE
Operation	-4 to +158°F (-20 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+14 to +140°F (-10 to +60°C)

STANDARDS
Standards	OFNR, FT4

Ordering Information

PART NUMBER	FIBER SIZE	FIBER COUNT	NOMINAL CABLE OD (in \| mm)	NOMINAL WEIGHT (lb/kft \| kg/km)	FIBERS PER RIBBON	NO. OF BUNDLES
SE-8RPP0288-B	250 μm	288f	0.62 in (15.7 mm)	200.0 lb/kft (297.0 kg/km)	12f	4
SE-8RPP0576-B	250 μm	576f	0.85 in (21.5 mm)	224.0 lb/kft (334.0 kg/km)	12f	8
SE-8RPP1728-B	250 μm	1,728f	0.85 in (21.5 mm)	319.0 lb/kft (475.0 kg/km)	12f	24
SE-8RPT0288-B	200 μm	288f	0.55 in (14.0 mm)	115.0 lb/kft (171.0 kg/km)	12f	4
SE-8RPT0432-B	200 μm	432f	0.61 in (15.4 mm)	134.0 lb/kft (200.0 kg/km)	12f	4
SE-8RPT1728-B	200 μm	1,728f	0.97 in (24.7 mm)	261.0 lb/kft (389.0 kg/km)	12f	24

Accessories

PART NUMBER	DESCRIPTION
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
UCTS-001	Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
BTR-3	Buffer Tube Slit & Ring Tool, 0.250 – 0.563 in (6.4 – 14.3 mm) for End/Mid-Span Access
UCTS-001-BLADE	Replacement Blade for UCTS-001
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and Up to 3 mm Jacketed Single Fibers
FOS-01	Lynx-CustomFit™ Fiber Optic Shears

Resources

Fiber Optic Ribbon Termination Resources
SRP (SP-F02-035) Pliable Ribbon Indoor Riser Cable Preparation
SRP (SP-F02-045) Freeform Ribbon™ Matrix Removal Procedure
Freeform Ribbon™ Marking Codes
UCTS-001 Instructions

Optical Fiber Specifications
Sumitomo Electric PureAccess® Single-Mode Fiber Specification

Freeform Ribbon™ Interlocking Armored Indoor Riser Central Tube Cables

Jon Strouse — Wed, 07 Nov 2018 15:18:06 +0000

Specifications

GENERAL
Application	Indoor
Jacket Color	Yellow
Cable Structure	Central Tube
Ribbon Type	Freeform Ribbon™
Metallic Elements	Bonding/Grounding Required

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

BEND RADIUS
During Installation (Dynamic)	20 x Cable O.D.
After Installation (Static)	10 x Cable O.D.

MECHANICAL CHARACTERISTICS
Maximum Tensile Load (During Installation)	600 lb (2,700 N)
Maximum Recommended Service Load	200 lb (890 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

TEMPERATURE RANGE
Operation	-4 to +158°F (-20 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+14 to +140°F (-10 to +60°C)

STANDARDS
Standards	OFCR, FT-4/UL 1666

Ordering Information

PART NUMBER	FIBER SIZE	FIBER COUNT	NOMINAL CABLE OD (in \| mm)	NOMINAL CABLE ARMOR OD (in \| mm)	NOMINAL WEIGHT (lb/kft \| kg/km)	FIBERS PER RIBBON	NO. OF BUNDLES
SE-8RLP1728-B	250 μm	1,728f	1.01 (25.6)	1.51 (38.4)	674.0 (1,003.0)	12f	24

Accessories

PART NUMBER	DESCRIPTION
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
ACS-01	Armored Cable Slit & Ring Tool, 0.315 – 1.125 in (8 – 28.6 mm) for End/Mid-Span Access
UCTS-001	Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
ACS-01-BLADE	Replacement Blade for ACS-01
UCTS-001-BLADE	Replacement Blade for UCTS-001
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and Up to 3 mm Jacketed Single Fibers
FOS-01	Lynx-CustomFit™ Fiber Optic Shears

Freeform Ribbon™ OSP All-Dielectric Central Tube Cables

Jon Strouse — Thu, 12 Nov 2020 22:07:45 +0000

Specifications

GENERAL
Application	Outside Plant
Jacket Color	Black
Cable Structure	Central Tube
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

BEND RADIUS
During Installation (Dynamic)	20 x Cable O.D.
After Installation (Static)	10 x Cable O.D.

MECHANICAL CHARACTERISTICS
Maximum Tensile Load (During Installation)	600 lb (2,670 N)
Maximum Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	125 lb/in (220 N/cm)

TEMPERATURE RANGE
Operation	-40 to +158°F (-40 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	-22 to +140°F (-30 to +60°C)

Ordering Information

PART NUMBER	FIBER SIZE	FIBER COUNT	NOMINAL CABLE OD (in \| mm)	NOMINAL WEIGHT (lb/kft \| kg/km)	FIBERS PER RIBBON	NO. OF BUNDLES
SE-8DDP0096-B-12	250 μm	96f	0.45 (11.5)	56.0 (83.7)	12f	N/A
SE-8DDT0864-B	200 μm	864f	0.84 (21.4)	218.6 (326.3)	12f	12
SE-8DDT1728-B	200 μm	1,728f	0.98 (25.0)	283.2 (422.7)	12f	24

Accessories

PART NUMBER	DESCRIPTION
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
UCTS-001	Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
UCTS-001-BLADE	Replacement Blade for UCTS-001
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers
FOS-01	Lynx-CustomFit™ Fiber Optic Shears

Freeform Ribbon™ Outdoor/Indoor LSZH Riser Central Tube Cables

Jon Strouse — Tue, 26 Feb 2019 14:21:36 +0000

Declaration of Performance

Specifications

GENERAL
Application	Outside Plant
Jacket Color	Black PE
Cable Structure	Central Tube
Ribbon Type	Freeform Ribbon™

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

BEND RADIUS
During Installation (Dynamic)	20 x Cable OD
After Installation (Static)	10 x Cable OD

MECHANICAL CHARACTERISTICS
Maximum Tensile Load (During Installation)	600 lb (2,670 N)
Maximum Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	125 lb/in (220 N/cm)

TEMPERATURE RANGE
Operation	-40 to +158°F (-40 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	-22 to +140°F (-30 to +60°C)

STANDARDS
Standards	OFNR, FT4, Low Smoke/ST-1, NFPA 130

Ordering Information

PART NUMBER	FIBER COUNT	NOMINAL CABLE OD (in \| mm)	NOMINAL WEIGHT (lb/kft \| kg/km)	FIBERS PER RIBBON	NO. OF BUNDLES	CPR RATING
250 μm
SE-8RMP0012-B-12	12f	0.44 (11.3)	83.9 (125.2)	12f	N/A	Cca, s1b, d2, a1
SE-8RMP0024-B-12	24f	0.44 (11.3)	84.4 (126.0)	12f	N/A	Cca, s1b, d2, a1
SE-8RMP0036-B-12	36f	0.44 (11.3)	84.9 (126.7)	12f	N/A	Cca, s1b, d2, a1
SE-8RMP0048-B-12	48f	0.44 (11.3)	85.4 (127.4)	12f	N/A	Cca, s1a, d1, a1
SE-8RMP0072-B	72f	0.56 (14.1)	102.0 (152.3)	12f	1	Cca, s1b, d2, a1
SE-8RMP0096-B-12	96f	0.56 (14.1)	123.3 (184.0)	12f	N/A	Cca, s1b, d2, a1
SE-8RMP0144-B	144f	0.56 (14.1)	132.3 (197.5)	12f	2	B2ca, s1a, d0, a1
SE-8RMP0192-B-12	192f	0.67 (17.0)	170.9 (255.0)	12f	N/A	Cca, s1b, d2, a1
SE-8RMP0216-B	216f	0.67 (17.0)	171.4 (255.8)	12f	N/A	Cca, s1b, d2, a1
SE-8RMP0288-B	288f	0.67 (17.0)	174.7 (260.0)	12f	4	Cca, s1b, d0, a1
SE-8RMP0432-B	432f	0.73 (18.5)	201.7 (301.0)	12f	6	Cca, s1b, d2, a1
SE-8RMP0576-B	576f	0.95 (24.2)	326.5 (487.3)	12f	8	Cca, s1b, d2, a1
SE-8RMP0864-B	864f	0.95 (24.2)	337.6 (503.9)	12f	12	Cca, s1b, d2, a1
SE-8RMP1152-B	1,152f	1.06 (26.8)	409.5 (610.7)	12f	16	Cca, s1b, d2, a1
SE-8RMP1728-B	1,728f	1.13 (28.6)	449.3 (670.6)	12f	24	B2ca, s2, d0, a1
200 μm
SE-8RMT0012-B-12	12f	0.44 (11.3)	84.2 (125.3)	12f	N/A	Cca, s1b, d2, a1
SE-8RMT0024-B-12	24f	0.44 (11.3)	84.4 (126.0)	12f	N/A	Cca, s1b, d2, a1
SE-8RMT0036-B-12	36f	0.44 (11.3)	85.0 (126.8)	12f	N/A	Cca, s1b, d2, a1
SE-8RMT0048-B-12	48f	0.44 (11.3)	85.4 (127.5)	12f	N/A	Cca, s1a, d1, a1
SE-8RMT0072-B	72f	0.56 (14.1)	101.6 (151.6)	12f	1	Cca, s1b, d2, a1
SE-8RMT0144-B	144f	0.56 (14.1)	132.4 (197.6)	12f	2	Cca, s1b, d2, a1
SE-8RMT0216-B	216f	0.60 (15.3)	154.6 (230.8)	12f	3	Cca, s1b, d2, a1
SE-8RMT0288-B	288f	0.67 (17.0)	157.5 (235.0)	12f	4	Cca, s1b, d0, a1
SE-8RMT0432-B	432f	0.73 (18.5)	202.1 (301.7)	12f	6	Cca, s1b, d0, a1
SE-8RMT0864-B	864f	0.95 (24.2)	343.2 (512.3)	12f	12	Cca, s1b, d2, a1
SE-8RMT1728-B	1,728f	1.13 (28.6)	408.5 (609.7)	12f	24	B2ca, s2, d0, a1
SE-8RMT2880-B	2,880f	1.30 (32.7)	606.2 (904.7)	12f	20	Cca, s1b, d2, a1
SE-8RMT3456-B	3,456f	1.30 (32.7)	628.6 (938.2)	12f	24	Cca, s1b, d2, a1

Accessories

PART NUMBER	DESCRIPTION
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
UCTS-001	Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
BTR-3	Buffer Tube Slit & Ring Tool, 0.250 – 0.563 in (6.4 – 14.3 mm) for End/Mid-Span Access
UCTS-001-BLADE	Replacement Blade for UCTS-001
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and Up to 3 mm Jacketed Single Fibers
FOS-01	Lynx-CustomFit™ Fiber Optic Shears

Freeform Ribbon™ Outdoor/Indoor Plenum Cable

Jon Strouse — Thu, 15 Jun 2023 02:43:38 +0000

Specifications

GENERAL
Application	Outdoor/Indoor
Jacket Color	Yellow
Cable Structure	Central Tube
Ribbon Type	Freeform Ribbon™
Metallic Elements	Bonding/Grounding Required

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Attenuation – 1310 nm	0.40 dB/km
Attenuation – 1550 nm	0.30 dB/km

BEND RADIUS
During Installation	20 x Cable OD
After Installation	10 x Cable OD

MECHANICAL CHARACTERISTICS
Max. Tensile Load During Installation	600 lb (2,670 N)
Max. Recommended Service Load	200 lb (890 N)
Compression Resistance	124 lb/in (220 N/cm)

TEMPERATURE RANGE
Operation	-40 to +158°F (-40 to +70°C)
Store & Shipping	-40 to +158°F (-40 to +70°C)
Installation	-14 to +140°F (-10 to +60°C)

STANDARDS
Standards	OFNP, FT6/NFPA 262, ICEA 596

Ordering Information

PART NUMBER	FIBER SIZE	FIBER COUNT	NOMINAL CABLE OD IN (MM)	NOMINAL WEIGHT LB/KFT (KG/KM)	FIBERS PER BUNDLE	NO. OF BUNDLES
SE-8RYP0144-B	250 μm	144f	0.56 in (14.3 mm)	141.0 lb/kft (210.1 kg/km)	72f	2

Accessories

PART NUMBER	DESCRIPTION
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
UCTS-001	Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
UCTS-001-BLADE	Replacement Blade for UCTS-001
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Resources

Fiber Optic Ribbon Termination Resources
SRP (SP-F02-043) Pliable Ribbon Plenum Cable Preparation
SRP (SP-F02-045) Freeform Ribbon™ Matrix Removal Procedure
Freeform Ribbon™ Marking Codes
UCTS-001 Instructions

Optical Fiber Specifications
Sumitomo PureAccess® Single-Mode Fiber Specification

Freeform Ribbon™ Interlocking Armored Outdoor/Indoor LSZH Riser Central Tube Cables

Jon Strouse — Sun, 03 Sep 2023 20:47:36 +0000

Specifications

GENERAL
Application	Outdoor/Indoor
Jacket Color	Black PE
Cable Structure	Central Tube
Ribbon Type	Freeform Ribbon™
Metallic Elements	Bonding/Grounding Required

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

BEND RADIUS
During Installation	20 x Cable OD
After Installation	10 x Cable OD

MECHANICAL CHARACTERISTICS
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Compression Resistance	125 lb/in (220 N/cm)

TEMPERATURE RANGE
Operation	-40 to +158°F (-40 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+14 to +140°F (-10 to +60°C)

STANDARDS
Standards	NFPA 130, NFPA 502, OFCR, FT4, Low Smoke/ST-1

Ordering Information

PART NUMBER	FIBER SIZE	FIBER COUNT	NOMINAL CABLE OD (in \| mm)	NOMINAL CABLE ARMOR OD (in \| mm)	NOMINAL WEIGHT (lb/kft \| kg/km)	FIBER PER RIBBON	NO. OF BUNDLES
SE-8RAP0012-B-12	250 μm	12f	0.44 (11.3)	0.78 (19.7)	231.2 (344.0)	12f	N/A
SE-8RAP0024-B-12	250 μm	24f	0.44 (11.3)	0.78 (19.7)	231.2 (344.0)	12f	N/A
SE-8RAP0036-B-12	250 μm	36f	0.44 (11.3)	0.78 (19.7)	231.2 (344.0)	12f	N/A
SE-8RAP0048-B-12	250 μm	48f	0.44 (11.3)	0.78 (19.7)	231.2 (344.0)	12f	N/A
SE-8RAP0072-B	250 μm	72f	0.56 (14.1)	0.95 (24.2)	307.1 (457.0)	12f	1
SE-8RAP0096-B-12	250 μm	96f	0.56 (14.1)	0.95 (24.2)	301.7 (449.0)	12f	N/A
SE-8RAP0144-B	250 μm	144f	0.56 (14.1)	0.95 (24.2)	307.1 (457.0)	12f	2
SE-8RAP0288-B	250 μm	288f	0.67 (17.0)	1.01 (25.6)	324.4 (522.0)	12f	4
SE-8RAP0432-B	250 μm	432f	0.73 (18.5)	1.07 (27.2)	411.9 (613.0)	12f	6
SE-8RAP0576-B	250 μm	576f	0.96 (24.2)	1.19 (30.1)	534.2 (795.0)	12f	8
SE-8RAP0864-B	250 μm	864f	0.96 (24.2)	1.26 (31.9)	564.5 (840.0)	12f	12
SE-8RAP1728-B	250 μm	1,728f	1.13 (28.6)	1.48 (37.5)	767.4 (1,142.0)	12f	24
SE-8RAT1728-B	200 μm	1,728f	1.13 (28.6)	1.48 (37.5)	767.4 (1,142.0)	12f	24

Accessories

PART NUMBER	DESCRIPTION
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
ACS-01	Armored Cable Slit & Ring Tool, 0.315 – 1.125 in (8 – 28.6 mm) for End/Mid-Span Access
ACS-01-BLADE	Replacement Blade for ACS-01
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and Up to 3 mm Jacketed Single Fibers
FOS-01	Lynx-CustomFit™ Fiber Optic Shears

Freeform Ribbon™ Transit Outdoor/Indoor LSZH-NFPA130 OFCR Steel Armored Ribbon Cables

Jon Strouse — Wed, 06 Sep 2023 01:21:25 +0000

Specifications

General

Property	Specification
Application	Outdoor/Indoor
Jacket Color	Black PE
Cable Structure	Central Tube
Ribbon Type	Freeform Ribbon™
Metallic Elements	Bonding/Grounding Required

Fiber

Property	Specification
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Mechanical Characteristics

Property	Specification
Maximum Tensile Load (During Installation)	600 lb (2,670 N)
Maximum Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	125 lb/in (220 N/cm)

Bend Radius

Property	Specification
During Installation (Dynamic)	20 x Cable OD
After Installation (Static)	15 x Cable OD

Temperature Range

Property	Specification
Operation	-40 to +158°F (-40 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	-22 to +140°F (-30 to +60°C)

Standards

Property	Specification
Standards	Referencing Telcordia GR-20; OFCR; NFPA 130

Ordering Information

Part Number	Fiber Count	Nominal Cable OD		Nominal Weight		No of Bundles	Fiber No. of Unit
Part Number	Fiber Count	IN	MM	LB/KFT	KG/KM	No of Bundles	Fiber No. of Unit
250μm
SE-8USP0144-B-12	144f	0.61	15.5	207.3	309.4	2	72
SE-8USP0432-B	432f	0.79	20.3	300.0	446.6	6	72
SE-8USP0864-B	864f	0.88	22.4	360.0	537.0	12	72
SE-8USP1728-B	1,728f	1.08	27.5	490.3	731.9	24	72

Accessories

Part Number	Description
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
ACS-01	Armored Cable Slit & Ring Tool, 0.315 – 1.125 in (8 – 28.6 mm) for End/Mid-Span Access
UCTS-001	Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
ACS-01-BLADE	Replacement Blade for ACS-01
UCTS-001-BLADE	Replacement Blade for UCTS-001
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and Up to 3 mm Jacketed Single Fibers
FOS-01	Lynx-CustomFit™ Fiber Optic Shears