Freeform Ribbon™ Slotted Core Cables

(APAC Region Only) Freeform Ribbon™ Conventional OSP Nylon Sheath All-Dielectric Slotted Core Cables

Jon Strouse — Sun, 11 Aug 2024 01:32:11 +0000

Specifications

General
Region Availability	APAC Region Only
Application	Outside Plant
Jacket Color	Aqua
Cable Structure	Slotted Core
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Bend Radius
During Installation	20 x Cable OD

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Compression Resistance	124 lb/in (220 N/cm)

Temperature Range
Operation	+14°F to +158°F (-10°C to +70°C)

Standards
Standards	Referencing EIA/TIA-455

Ordering Information

SEI Part Number	Fiber Size	Fiber Count	Nominal Cable OD		Nominal Weight		Fibers Per Ribbon	Fiber Per Slot	Stranding	Strength Member
SEI Part Number	Fiber Size	Fiber Count	IN	MM	LB/KFT	KG/KM	Fibers Per Ribbon	Fiber Per Slot	Stranding	Strength Member
NM432SM(PA)- SZ12(EZB)-WB-E/NY{LB}	250 μm	432f	0.83	21.0	201.6	300.0	12f	72	SZ	FRP
NM1728SM(PA)- TS12-WB-E/NY{LB}	250 μm	1,728f	1.14	29.0	470.4	700.0	12f	288	HL	FRP
NM288SM(PA200)- SZ12(EZB)-WB-E/NY{LB}	200 μm	288f	0.63	16.0	147.8	220.0	12f	48	SZ	FRP
NM432SM(PA200)- SZ12(EZB)-WB-E/NY{LB}	200 μm	432f	0.69	17.5	181.4	270.0	12f	72	SZ	FRP
NM864SM(PA200)- SZ12(EZB)-WB-E/NY{LB}	200 μm	864f	0.79	20.0	255.3	380.0	12f	144	SZ	FRP
NM1728SM(PA200)- SZ12(EZB)-WB-E/NY{LB}	200 μm	1,728f	1.06	27.0	315.8	470.0	12f	288	SZ	FRP

Accessories

Part Number	Description
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
ACS-01	Armored Cable Slit & Ring Tool, 0.315 – 1.125 in (8 – 28.6 mm) for End/Mid-Span Access
ACS-01-BLADE	Replacement Blade for ACS-01
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers

Resources

Data Center Solutions | Sumitomo Electric Lightwave Corp. (SEL)

Global Data Center Support – Asia Pacific & Middle East

(APAC Region Only) Freeform Ribbon™ Conventional OSP Slotted Core Cables

Jon Strouse — Sun, 11 Aug 2024 19:21:15 +0000

Specifications

General
Region Availability	APAC Region Only
Application	Outside Plant
Jacket Color	Black
Cable Structure	Slotted Core
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Bend Radius
During Installation	20 x Cable OD

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Compression Resistance	124 lb/in (220 N/cm)

Temperature Range
Operation	-40°F to +158°F (-40°C to +70°C)

Standards
Standards	Referencing EIA/TIA-455

Ordering Information

Part Number		Fiber Size	Fiber Count	Nominal Cable OD		Nominal Weight		Fibers Per Ribbon	Fiber Per Slot	Stranding	Strength Member
SEL	SEI	Fiber Size	Fiber Count	IN	MM	LB/KFT	KG/KM	Fibers Per Ribbon	Fiber Per Slot	Stranding	Strength Member
N/A	288SM(PA200)- SZ12(EZB)-WB-E	200 μm	288f	0.56	14.2	117.6	175.0	12f	48	SZ	Metallic
DRSC-OSP6-SA00288- 200-ADEROLD	NM288SM(PA200)- SZ12(EZB)-WB-E	200 μm	288f	0.60	15.0	127.7	190.0	12f	48	SZ	FRP
DRSC-OSP6-SA00432- 200-ADEROLD	NM432SM(PA200)- SZ12(EZB)-WB-E	200 μm	432f	0.65	16.5	134.4	200.0	12f	72	SZ	FRP
DRSC-OSP6-SA00864- 200-ADE	NM864SM(PA200)- SZ12(EZB)-WB-E	200 μm	864f	0.75	19.0	201.6	300.0	12f	144	SZ	FRP
DRSC-OSP6-SA01728- 200-ADE	NM1728SM(PA200)- SZ12(EZB)-WB-E	200 μm	1,728f	0.99	25.0	268.8	400.0	12f	288	SZ	FRP

Accessories

Part Number	Description
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
ACS-01	Armored Cable Slit & Ring Tool, 0.315 – 1.125 in (8 – 28.6 mm) for End/Mid-Span Access
ACS-01-BLADE	Replacement Blade for ACS-01
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers

Resources

Data Center Solutions | Sumitomo Electric Lightwave Corp. (SEL)

Global Data Center Support – Asia Pacific & Middle East

(APAC Region Only) Freeform Ribbon™ Indoor/Outdoor LSZH Slotted Core Cables

Jon Strouse — Sun, 11 Aug 2024 19:40:16 +0000

Specifications

General
Region Availability	APAC Region Only
Application	Outside Plant
Jacket Color	Black
Cable Structure	Slotted Core
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

Fiber
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Bend Radius
During Installation	20 x Cable OD

Mechanical Characteristics
Max. Tensile Load (During Installation)	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Compression Resistance	124 lb/in (220 N/cm)

Ordering Information

SEI Part Number	Fiber Size	Fiber Count	Nominal Cable OD		Nominal Weight		Fibers Per Ribbon	Fiber Per Slot	Stranding	Strength Member	Standards
SEI Part Number	Fiber Size	Fiber Count	IN	MM	LB/KFT	KG/KM	Fibers Per Ribbon	Fiber Per Slot	Stranding	Strength Member	Standards
NM864SM(PA)-TS12(EZB)- WB-E-LSZH(EN)	250 μm	864f	0.89	22.5	295.7	440.0	12f	144	HL	FRP	IEC 60332-3 Part 3 Cat.C	EN50399
NM1728SM(PA)-TS12(EZB)- WB-E-LSZH(EN)	250 μm	1,728f	1.11	28.0	403.2	600.0	12f	288	HL	FRP	IEC 60332-3 Part 3 Cat.C	EN50399
NM288SM(PA200)-SZ12(EZB)- WB-E-LSZH	200 μm	288f	0.65	16.5	168.0	250.0	12f	48	SZ	FRP	IEC 60332-3 Part 3 Cat.C	IEC 61034-2
288SM(PA200)-SZ12(EZB)- WB-E-LSZH	200 μm	288f	0.61	15.5	164.7	245.0	12f	48	SZ	Metallic	IEC 60332-3 Part 3 Cat.C	IEC 61034-2
432SM(PA200)-SZ12(EZB)- WB-E-FR	200 μm	432f	0.69	17.5	221.7	330.0	12f	72	SZ	Metallic	JIS C 3521	N/A
NM1728SM(PA200)-TS12(EZB)- WB-E-LSZH(EN)	200 μm	1,728f	0.97	24.5	309.1	460.0	12f	288	HL	FRP	IEC 60332-3 Part 3 Cat.C	EN50399

Accessories

Part Number	Description
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
ACS-01	Armored Cable Slit & Ring Tool, 0.315 – 1.125 in (8 – 28.6 mm) for End/Mid-Span Access
ACS-01-BLADE	Replacement Blade for ACS-01
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers

Resources

Data Center Solutions | Sumitomo Electric Lightwave Corp. (SEL)

Global Data Center Support – Asia Pacific & Middle East

Freeform Ribbon™ Indoor/Outdoor X-Slotted Core Cable

Jon Strouse — Tue, 05 Nov 2024 11:23:29 +0000

Specifications

General
Application	Indoor/Outdoor
Jacket Color	Black
Jacket Material	Flame Retardant Polyethylene (FRPE)
Cable Structure	Slotted Core
Ribbon Type	Freeform Ribbon™
Metallic Elements	Bonding / Grounding Required

Fiber
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

Mechanical Characteristics
Maximum Tensile Load (During Installation)	600 lb (2,670 N)
Maximum Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

Bend Radius
During Installation (Dynamic)	20 x Cable OD
After Installation (Static)	12.5 x Cable OD

Temperature Range
Operation	-40°F to +158°F (-40°C to +70°C)

Standards
Standards	OFNR, UL 1666

Ordering Information

Part Number	Fiber Count	Nominal Cable OD		Nominal Weight		No. of Slots	Fiber Per Bundle	Fibers Per Slot	Strength Member
Part Number	Fiber Count	IN	LB/KFT	LBS/KFT	KG/KM	No. of Slots	Fiber Per Bundle	Fibers Per Slot	Strength Member
200 μm
SE-8GGT6912-B-M	6,912f	1.30	33.0	655.0	975.0	4	288f	1,728f	FRP

Accessories

Part Number	Description
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Freeform Ribbon™ UHFC OSP All-Dielectric Slotted Core Cables

Jon Strouse — Mon, 29 Aug 2016 13:19:43 +0000

Specifications

GENERAL
Application	Outside Plant
Jacket Color	Black PE
Cable Structure	Slotted Core
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Attenuation – 1310 nm	0.40 dB/km
Attenuation – 1550 nm	0.30 dB/km

MECHANICAL CHARACTERISTICS
Max. Tensile Load During Installation	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Compression Resistance	124 lb/in (220 N/cm)

TEMPERATURE RANGE
Operation	-40 to +158°F (-40 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+14 to +122°F (-10 to +50°C)

Ordering Information

PART NUMBER	FIBER SIZE	FIBER COUNT	NOMINAL CABLE OD (in \| mm)	NOMINAL WEIGHT (lb/kft \| kg/km)	NO. OF SLOTS	FIBER PER RIBBON	STRANDING
DRSC – GNS – 15021	250 μm	1,152f	0.98 (25.0)	302.4 (450.0)	6	12f	SZ
DRSC-13079SA0001728-B	250 μm	1,728f	1.02 (26.0)	302.4 (450.0)	6	12f	HL
DRSC-OSP6-SA003456-250-ADE	250 μm	3,456f	1.26 (32.0)	470.3 (700.0)	6	12f	HL
DRSC-OSP6-SA001728-200-ADE	200 μm	1,728f	0.98 (25.0)	268.8 (400.0)	6	12f	SZ
DRSC−13261SA003456	200 μm	3,456f	1.10 (28.0)	362.8 (540.0)	6	12f	HL
DRSC−OSP8−SA06912−200−ADE	200 μm	6,912f	1.46 (37.0)	638.4 (950.0)	8	12f	HL

Lower Attenuation Option Available Upon Request

Accessories

PART NUMBER	DESCRIPTION
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and Up to 3 mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Freeform Ribbon™ Armored Conventional OSP Slotted Core Cables

Jon Strouse — Thu, 12 Jan 2023 12:44:43 +0000

Specifications

GENERAL
Application	Outside Plant
Jacket Color	Black PE
Cable Structure	Slotted Core
Ribbon Type	Freeform Ribbon™
Metallic Elements	Bonding/Grounding Required

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Attenuation – 1310 nm	0.40 dB/km
Attenuation – 1550 nm	0.25 dB/km

BEND RADIUS
During Installation	20 x Cable OD
After Installation	15 x Cable OD

MECHANICAL CHARACTERISTICS
Max. Tensile Load During Installation	600 lb (2,670 N)
Max. Recommended Service Load	180 lb (800 N)
Compression Resistance	124 lb/in (220 N/cm)

TEMPERATURE RANGE
Operation	-40 to +158°F (-40 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+14 to +122°F (-10 to +50°C)

STANDARDS
Standards	Referencing Telcordia GR-20

Ordering Information

PART NUMBER	FIBER SIZE	FIBER COUNT	NOMINAL CABLE OD (in \| mm)	NOMINAL WEIGHT (lb/kft \| kg/km)	NO. OF SLOTS	FIBER PER SLOT	STRANDING
DRSC-OSP6-SA00144-250-STTPROL	250 μm	144f	0.79 (20.0)	211.7 (315)	6	24f	SZ
DRSC-OSP6-SA00288-250-STTPROL	250 μm	288f	0.79 (20.0)	218.4 (325.0)	6	48f	SZ
DRSC-OSP6-SA00432-250-STTPROL	250 μm	432f	0.87 (22.5)	252.0 (375.0)	6	72f	SZ
DRSC-OSP6-SA00864-250-STTPROL	250 μm	864f	0.98 (25.0)	329.3 (490.0)	6	144f	SZ
DRSC-OSP6-SA01728-250-STTPROL	250 μm	1,728f	1.28 (32.5)	460.3 (685.0)	6	288f	SZ

Accessories

PART NUMBER	DESCRIPTION
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
ACS-01	Armored Cable Slit & Ring Tool, 0.315 – 1.125 in (8 – 28.6 mm) for End/Mid-Span Access
ACS-01-BLADE	Replacement Blade for ACS-01
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and Up to 3 mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears

Freeform Ribbon™ Conventional OSP All-Dielectric Slotted Core Cables

Jon Strouse — Sat, 02 Sep 2023 02:23:42 +0000

Specifications

GENERAL
Application	Outside Plant
Jacket Color	Black PE
Cable Structure	Slotted Core
Ribbon Type	Freeform Ribbon™
Metallic Elements	No Bonding/Grounding Required

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.25 dB/km

BEND RADIUS
During Installation (Dynamic)	20 x Cable OD
After Installation (Static)	10 x Cable OD

MECHANICAL CHARACTERISTICS
Maximum Tensile Load (During Installation)	600 lb (2,670 N)
Maximum Recommended Service Load	180 lb (800 N)
Maximum Compression Resistance	124 lb/in (220 N/cm)

TEMPERATURE RANGE
Operation	-40 to +158°F (-40 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+14 to +140°F (-10 to +60°C)

STANDARDS
Standards	Referencing Telcordia GR-20

Ordering Information

PART NUMBER	FIBER SIZE	FIBER COUNT	NOMINAL CABLE OD (in \| mm)	NOMINAL WEIGHT (lb/kft \| kg/km)	NO. OF SLOTS	FIBER PER SLOT	STRANDING
DRSC-OSP6-SA00144-250-ADEROL	250 μm	144f	0.67 (17.0)	134.4 (200.0)	6	24f	SZ
DRSC-OSP6-SA00288-250-ADEROL	250 μm	288f	0.67 (17.0)	141.1 (220.0)	6	48f	SZ
DRSC-OSP6-SA00432-250-ADEROL	250 μm	432f	0.79 (20.0)	178.1 (265.0)	6	72f	SZ
DRSC-OSP6-SA00864-250-ADEROL	250 μm	864f	0.93 (23.5)	245.3 (365.0)	6	144f	SZ
DRSC-OSP6-SA01728-250-ADEROL	250 μm	1,728f	1.16 (29.5)	295.7 (440.0)	6	288f	SZ

Accessories

PART NUMBER	DESCRIPTION
CRC-001	Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002	Cable Slit Tool for End/Mid-Span Access
ACS-01	Armored Cable Slit & Ring Tool, 0.315 – 1.125 in (8 – 28.6 mm) for End/Mid-Span Access
ACS-01-BLADE	Replacement Blade for ACS-01
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
MA-2-REFILL	Ribbon Matrix Remover with Board & Double Sided Tape (Qty. 25)
JR-7	Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250 μm, 900 μm, and Up to 3 mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears