Freeform Ribbon™ Interconnect Cordage

https://sumitomoelectriclightwave.com Next Generation Thinking Wed, 08 Jan 2025 16:06:21 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://sumitomoelectriclightwave.com/wp-content/uploads/2019/08/fav.png Freeform Ribbon™ Interconnect Cordage https://sumitomoelectriclightwave.com 32 32 Freeform Ribbon™ Flexible Indoor Plenum Cordage https://sumitomoelectriclightwave.com/product/freeform-ribbon-indoor-plenum-cord/ https://sumitomoelectriclightwave.com/product/freeform-ribbon-indoor-plenum-cord/#respond Fri, 15 Nov 2024 19:24:17 +0000 https://www.sumitomoelectric.com/?post_type=product&p=6358

Specifications

GENERAL
Application	Indoor
Jacket Color	Yellow
Cable Structure	Interconnect Cordage
Ribbon Type	Freeform Ribbon™

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

MECHANICAL CHARACTERISTICS
Maximum Tensile Load During Installation	50 lb (220 N)
Maximum Recommended Service Load	15 lb (66 N)
Maximum Compression Resistance	20 lb/in (35 N/cm)

BEND RADIUS
During Installation (Dynamic)	20 x Cable OD
After Installation (Static)	10 x Cable OD

TEMPERATURE RANGE
Operation	+32 to +158°F (0 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+32 to +140°F (0 to +60°C)

STANDARDS
Standards	OFNP, FT6

Ordering Information

PART NUMBER	FIBER COUNT	NOMINAL CABLE OD (in \| mm)	NOMINAL WEIGHT (lb/kft \| kg/km)	FIBERS PER RIBBON	NO. OF BUNDLES
250μm
SE-8IUP0012-B-12	12f	0.10 (3.0)	6.0 (8.9)	12f	N/A
SE-8IUP0024-B-12	24f	0.12 (3.0)	6.0 (8.9)	12f	N/A
SE-8IUP0048-B-12	48f	0.15 (3.8)	8.0 (11.9)	12f	N/A

Accessories

PART NUMBER	DESCRIPTION
BTR-2	Buffer Tube Slit & Ring Tool, 0.126 – 0.220 in (3.2 – 5.6 mm) for End/Mid-Span Access
BTS-TP1	Buffer Tube Slit Tool, 0.071 – 0.126 in (1.8 – 3.2 mm) for End/Mid-Span Access
FRSJ-01	Freeform Ribbon® Separation Tool Kit
JR-7	Heated Jacket Remover with AC-Adapter & Battery for Single Fibers & up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250μm, 900μm, and up to 3mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears
LYNX2-CORDTOOL-1.6-2.0-3.0	Buffer Tube Slit & Ring Tool, 0.06 – 0.09 in (1.6 – 2.4 mm) for Lynx-CustomFit™ Cord Prep and End Access
LYNX2-CORDTOOL-2.0-3.0	Buffer Tube Slit & Ring Tool, 0.08 – 0.12 in (2.0 – 3.0 mm) for Lynx-CustomFit™ Cord Prep and End Access
LYNX2-CORDTOOL-4.8	Buffer Tube Slit & Ring Tool, 0.06 – 0.12 in (1.6 – 3.0 mm) for Lynx-CustomFit™ Cord Prep and End/Mid-Span Access
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
MSAT-01	Buffer Tube Slit Tool, 0.12 – 0.26 in (2.9 – 6.8 mm) for End/Mid-Span Access, and Lynx-CustomFit™ Connectors

]]> https://sumitomoelectriclightwave.com/product/freeform-ribbon-indoor-plenum-cord/feed/ 0 Freeform Ribbon™ Indoor Plenum Cordage https://sumitomoelectriclightwave.com/product/freeform-ribbon-indoor-plenum-cordage/ https://sumitomoelectriclightwave.com/product/freeform-ribbon-indoor-plenum-cordage/#respond Tue, 10 Jan 2023 12:45:46 +0000 https://sumitomoelectriclightwave.com/?post_type=product&p=11817

Specifications

GENERAL
Application	Indoor
Jacket Color	Yellow
Cable Structure	Interconnect Cordage
Ribbon Type	Freeform Ribbon™

FIBER
Fiber Type	PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation Grades	Standard Single-Mode
Maximum Attenuation	1310 nm \| 0.40 dB/km 1550 nm \| 0.30 dB/km

MECHANICAL CHARACTERISTICS
Maximum Tensile Load During Installation	150 lb (660 N)
Maximum Recommended Service Load	45 lb (200 N)
Maximum Compression Resistance	20 lb/in (35 N/cm)

BEND RADIUS
During Installation	20 x Cable OD
After Installation	10 x Cable OD

TEMPERATURE RANGE
Operation	+32 to +158°F (0 to +70°C)
Storage & Shipping	-40 to +158°F (-40 to +70°C)
Installation	+32 to +140°F (0 to +60°C)

STANDARDS
Standards	ONFP, FT6

Ordering Information

PART NUMBER	FIBER COUNT	NOMINAL CABLE OD		NOMINAL WEIGHT		FIBERS PER RIBBON	NO. OF BUNDLES
PART NUMBER	FIBER COUNT	IN	MM	LBS/KFT	KG/KM	FIBERS PER RIBBON	NO. OF BUNDLES
250μm
SE-8IEP0024-B-12	24f	0.18	4.6	15.5	23.0	12f	n/a
SE-8IEP0048-B-12	48f	0.20	5.0	19.1	28.4	12f	n/a

Accessories

PART NUMBER	DESCRIPTION
BTR-2	Buffer Tube Slit & Ring Tool, 0.126 – 0.220 in (3.2 – 5.6 mm) for End/Mid-Span Access
BTS-TP1	Buffer Tube Slit Tool, 0.071 – 0.126 in (1.8 – 3.2 mm) for End/Mid-Span Access
FRSJ-01	Freeform Ribbon™ Separation Tool Kit
JR-7	Heated Jacket Remover with AC-Adapter & Battery for Single Fibers & up to 12-Fiber Ribbons
JR-M03	Jacket Remover for 250μm, 900μm, and up to 3mm Jacketed Single Fibers
LYNX-SHEARS	Lynx-CustomFit™ Aramid Shears
LYNX2-CORDTOOL-1.6-2.0-3.0	Buffer Tube Slit & Ring Tool, 0.06 – 0.09 in (1.6 – 2.4 mm) for Lynx-CustomFit™ Cord Prep and End Access
LYNX2-CORDTOOL-2.0-3.0	Buffer Tube Slit & Ring Tool, 0.08 – 0.12 in (2.0 – 3.0 mm) for Lynx-CustomFit™ Cord Prep and End Access
LYNX2-CORDTOOL-4.8	Buffer Tube Slit & Ring Tool, 0.06 – 0.12 in (1.6 – 3.0 mm) for Lynx-CustomFit™ Cord Prep and End/Mid-Span Access
MA-2-REFILL	Ribbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
MSAT-01	Buffer Tube Slit Tool, 0.12 – 0.26 in (2.9 – 6.8 mm) for End/Mid-Span Access, and Lynx-CustomFit™ Connectors

]]> https://sumitomoelectriclightwave.com/product/freeform-ribbon-indoor-plenum-cordage/feed/ 0